Operation procedures and processes of four-side sealing wet wipes packaging machine

I believe that many manufacturers have purchased the four-side sealing wet wipes packaging machine, but they are not skilled in the operation of the four-side sealing wet wipes packaging machine or are wondering if there is an operation process. Today, I will talk about an operation and process of the four-side sealing wet wipes packaging machine.

1. Preliminary preparation

Before starting to use the machine, you must first determine what kind of material you want to use, check whether the machine circuit can operate normally, and check whether there is any small debris on the machine. Dust state, and remember to sterilize the four-side sealing wet wipes packaging machine, configure the liquid pot according to the requirements of the product and other preparations.

2. Start up work

After confirming that there is no one next to the machine, stand in a safe area, turn on the circuit breaker, and power on the machine. Don’t worry after getting here, because the materials we added won’t find a place in the machine by themselves, we need us Artificially put non-woven (spunlace) and other materials on the corresponding roll frame, pull the material out, fold, spray water, and then pull to the fold to roll up the folding wheel, and then roll the film, pull stickers, etc. The material is placed on the corresponding roll holder, and the position is fixed. After that, we can turn on the main switch and water supply switch of the four-side sealing wet wipes packaging machine, adjust the system speed, and then we can carry out our normal production.

3. Emergency

In case of emergency, if you need to suspend the machine or need to suspend the machine for other reasons, you can refer to the following operations:

Stop the machine normally, press the main switch, turn off the water supply switch, turn off the speed control switch, and cut off the power supply.

If it is an emergency, such as when personal hazards occur, it is recommended to press the main switch immediately to stop the machine.

The above is part of the operation process and operation specifications of the four-side sealing wet wipes packaging machine. If you have any questions, you are welcome to come and consult.