What work is required for the maintenance and maintenance of sanitary napkin equipment?

At present, the maintenance of sanitary napkin equipment is a very important task, and there are many problems that many equipment maintenance personnel do not understand or pay enough attention to. Here, SUNY Industrial will popularize the maintenance and maintenance of sanitary napkin machinery for everyone.

1. Daily maintenance of sanitary napkin equipment

The daily maintenance of wingless sanitary napkin equipment seems simple, but it is often not taken seriously by people, and it is also the easiest to be ignored; but many times, big problems are often accumulated by small problems. Keep the surface of the instrument clean; check whether the voltage and power supply are normal before use; pay attention to observe whether the function of the instrument is normal during use, and fill in the use records. Develop good habits during daily maintenance to avoid damage incidents.

2. Sanitary napkin equipment maintenance work

When the sanitary napkin equipment fails, it is necessary to do a good job of information collection and preparation before maintenance; including the model, factory number, time of failure, whether there is any abnormal sound when the failure occurs, whether there has been a sudden power failure, whether the instrument has been moved, etc. .

It should be noted during maintenance that in the process of disassembling mechanical equipment, attention should be paid to the sequence, and do not use brute force to forcibly disassemble. The removed fastening screws and small parts should not be randomly placed, but should be sorted and stored to avoid loss. After the equipment is repaired and installed, it will be restored to its original state step by step in the reverse order, and there will be no redundant accessories. Damaged spare parts should also be marked, and restored to their original state after replacement without any mistakes. After the maintenance work is completed, clean the surface of the instrument and turn on the power to see if it can work normally. The protection engineers in maintenance should always pay attention to the protection work when repairing the instrument, whether it is leakage or cross infection, etc., they must pay attention to protection. Avoid unnecessary accidental injuries.

3. Regular maintenance and inspection of sanitary napkin equipment

Before the failure of sanitary napkin equipment, through the monitoring and diagnosis of equipment status, grasp whether the equipment has deteriorated, in order to find out the signs and hidden dangers of failure, and carry out preventive maintenance in time to control the occurrence of failure; after the failure occurs, analyze the cause in time, Research countermeasures, take measures to eliminate faults or improve equipment to prevent recurrence of faults. To do a good job in equipment failure management, it is necessary to carefully grasp the causes of failures, accumulate frequent and typical failure information and data, carry out failure analysis, pay attention to the research of failure laws and failure mechanisms, and strengthen daily maintenance, inspection and pre-repair. This avoids sudden failures and controls gradual failures.

At the same time, in order to meet the uncertainty of sanitary napkin equipment maintenance requirements and production cycle requirements, the quality of spare parts directly affects the quality of products. It can be seen that the management of equipment spare parts is mainly to meet the needs of key equipment for maintenance spare parts and ensure the normal operation of equipment.

The above is SUNY Industrial’s detailed introduction to the daily maintenance and maintenance of sanitary napkin machines. Sanitary napkin machines are high-tech automation equipment. Doing relevant maintenance work is conducive to the smooth progress of daily production. If you are interested in sanitary napkins If necessary, please feel free to contact us for consultation.